TOUGHENED AND LAMINATED

SAFETY GLASS

THE COMPANY

At the beginning of the twentieth century, Carlo Pina began work on glass in his artisan workshop in Erba (Italy). His son, Sergio Pina, founded Glassfer as an industry in 1955 and his nephew Carlo Pina brought it in the twenty-first century, and currently directs it with the help of his son Carlo Emanuele. Glassfer has always maintained high quality standards and is still a thriving industry.

PRODOTTI

SUNCOL

STAMPA DIGITALE

SUBLIMAZIONE

TESSUTI METALLICI

TESSUTI NATURALI

TESSUTI SINTETICI

LAMIERE METALLICHE

SABBIATURE

MATERIALI SPECIALI

ARCHITECTS AND DESIGNERS HAVE CHOSEN OUR TECHNOLOGY

PROGECTS

PROCESS

HEAT TREATMENTS
Thoughened and Hardened Glass

A big oven heat the glass till high temperature. The THOUGHENED GLASS OR HARDENED GLASS is obtained changing the cooling spped. The mechanical characteristics of the glass are modified according to the required specificements or performance. This technique is also used to fix the paint on the glass and in this process the “vitrified” paint forms a single body with the glass and becomes irremovable.

LAMINATED GLASS
PVB or SentryGlas® laminated Glazing

The glass laminating is the combination of two or more sheets of glass using a plastic film used as a glue, in this way it is possible to increase the level of safety of the glazing obtained.

DIGITAL PRINTING
Photo-realistic Digital Printing on Glass

Painted Glass: Silk-screen printing – Glazing – Digital printing on glass.

There are two plants for screen printing. One is suitable for painting the entire glass surface. There is also a modern system for painting glass using ink jets, which makes it possible to draw photo-realistic images on glass.

GLASS CUTTING

The large sheet glass are cut into glass panes of smaller sizes. The compressed air is used to avoid waste and contacts with the work surfaces and keep the glass intact.

Quality checks during the process ensure the absence of defects.

DIM MIN 90 x 120
DIM MAX 1600 x 3000

GLASS EDGE WORKING

The edges of the cut glass are edge worked to eliminate the sharp residues caused by the cut and to give an aesthetic result according to the customer’s requirement.

DRILLING AND CNC

Two glass drilling and two glass shaping cnc plants allow to perform various types of holes and notches. The CNC systems realize the products to design, reproducing the designed shapes and edge finishes.

SILK-SCREEN PRINTING AND GLAZING

Painted Glass: Silk-screen printing – Glazing – Digital printing on glass.

There are two plants for screen printing. One is suitable for painting the entire glass surface. There is also a modern system for painting glass using ink jets, which makes it possible to draw photo-realistic images on glass.

HST

Heat Soaked Test: this is an optional process that is carried out on tempered glass. According to the UNI EN regulations. With this process it is possible to show the presence of some intrinsic defects in the glass before the installation.

GLASS AND PAINTS

The flat glass used by Glassfer is purchased by the best Float manufacturers (flat glass) thanks to a consolidated commercial relationship.

REALIZZAZIONI

0
IMPIANTI
0
MQ
0%
Mercato Estero
0%
Mercato Nazionale

CONTATTI

Glassfer S.r.l.
Via S.Maurizio,66 – 22036 ERBA (CO) – Italy

Tel.+39 031 610344 | Fax.+39 031 610380

glassfer@www.glassfer.com